One used 2005 DECKEL MAHO DMU100P duoBLOCK 5-Axis Universal Machining Center:

Made in Pfronten, Germany

Only 10,643 hours total ! (Subject to change daily)

Install Date…………………………………………… 08/2005

Heidenhain Millplus iT 3-D control with 15″ TFT flat screen. Highlights:
-Easy to operate
-Contour programming
-Measuring cycles
-Fast batch processing
-Increased operator comfort through familiar DIN-ISO programming
-Clear layout of the graphic user-interface
-DECKEL MAHO spindle sensor technology
-DECKEL MAHO ATC (Application Tuning Cycle)

Control is equipped with the following options:

-Electronic handwheel

-2nd processor card with Windows 2000

-Application Tuning Cycle ATC:
ATC is a software option for easy tuning of the feed-drives at the
press of a button. Machine operator can adjust the machining
performance to preferred conditions: optimal surface quality,
optimal speed or optimal precision. These 3 settings are available
from anywhere within a workpiece program. Benefits are minimized
machining times combined with maximum quality for the desired
parameters. If necessary, parameters can be set in relation to
workpiece weight.

-WORKING RANGE-
X axis (longitudinal)…………………………… 39.4″ (1,000 mm)
Y axis (transverse)…………………………….. 39.4″ (1,000 mm)
Z axis (vertical)………………………………. 39.4″ (1,000 mm)

-MAXIMUM WORKPIECE DIMENSIONS-
Maximum workpiece diameter………………………. 49.2″ (1,250 mm)
Maximum workpiece height………………………… 62.2″ (1,580 mm)
Maximum workpiece weight…………………….. 4,409 lbs (2,000 kg)

-NC ROTARY TABLE 4TH AXIS (C-AXIS)-
Clamping surface… 43.3″ diameter x 35.4″ (1,100 mm diameter x 900 mm)
Maximum table load (centered)………………… 4,400 lbs (2,000 kg)
Maximum torque (40% ED)……………………. 3,614 ft/lb (4,900 Nm)
Maximum holding momentum (40% ED)…………… 3,614 ft/lb (4,900 Nm)
Rapid speed rotary axis (C-axis)………………………….. 30 rpm
1 x T-slot 18 H7 (alignment groove, table centre)
8 x T-slot 18 H12 (clamping grooves)
Distance between T-slots…………………………….. 4″ (100 mm)

-NC CONTROLLED 5TH AXIS (UNIVERSAL MILLING HEAD, B-AXIS)-
B axis – NC controlled range up to 190 degrees. From vertical position
0 degrees to the left -10 degrees (in direction of tool magazine) and to
the right to horizontal position +180 degrees=3D190 degrees in total.

-MAIN DRIVE-
Type……………………………………… AC controlled/digital
Power 40% duty cycle (S3)………………………….. 37 hp (28 kW)
Power 100% duty cycle (S1)…………………………. 25 hp (19 kW)
Spindle speed range……………………………….. 20-18,000 rpm
Acceleration/Deceleration……………………………… 2.2 seconds
Number of gear steps………………………………………. None
Maximum spindle torque 40% duty cycle………….. 89.2 ft/lb (121 Nm)
Maximum spindle torque 100% duty cycle…………. 60.48 ft/lb (82 Nm)
Spindle bearing diameter front……………………… 3.15″ (80 mm)
Spindle bearing diameter rear………………………. 2.36″ (60 mm)
Spindle taper…………………………………………… CAT 40
Tool clamping hydraulic/mechanical for draw bolt ISO/DIS 7388/II type B

-FEED DRIVES-
Type………………………………………. Brushless AC/Digital
Feed rate (x-y-z)…………………………… 2,362 ipm (60 m/min)
Rapid feed (x-y-z)………………………….. 2,362 ipm (60 m/min)
Acceleration (x-y-z)………………………………… 6/5/6 m/s-2
Feed power (x-y-z)………………………………….. 12/12/12 kN
Ball screw (x-y-z)………………………………… 40 mm x 20 mm

-40 POSITION TOOL CHANGER-
Magazine type…………………… Chain, horizontal, double gripper
Number of pockets…………………………………………… 40
Maximum tool weight……………………………… 33.1 lb (15 kg)
Maximum tool diameter with no neighbouring empty pockets 3.15″ (80 mm)
Maximum tool diameter with neighbouring empty pockets…. 6.3″ (160 mm)
Maximum tool length………………………………. 19.7″ (500 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution………………………………………. 0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution………………………………………. 0.001 mm

-EXTERNAL FLOOD COOLANT PUMP-
Pump output external jets pressure……………… 21.7 PSI (1.5 bar)
Pump output external jets flow rate…… 10.6 gallon/minute (40 l/min)
Coolant tank capacity…………………………. 158 gallon (600 l)

-580 PSI COOLANT THRU THE SPINDLE CENTRE (FORM AD)-
Pump output…………………………. 6.1 gallon/minute (23 l/min)
Pump pressure………………………………….. 580 PSI (40 bar)
This is a full 4th axis with Direct Measuring System (Heidenhain encoder)

-EQUIPPED WITH-
Fully enclosed protection cabin

Production Package consisting of:
-Coolant tank 158 gallon (600 l)
-Automatic coolant cleaning through paper band filter
-580 PSI (40 bar) coolant thru the spindle centre (Form AD)
-Rotating clear-view window (in cabin window)
-Chip conveyor with interval control

RENISHAW MP10 Infrared parts measuring probe

BLUM Laser tool measuring-tool length, diameter & broken tool detection
-Automatic retraction of the measuring unit in a protected housing.
-Tool length and diameter measuring in horizontal/vertical position.

Transformer

Spray pistol with pump, 14.5 PSI/10.4 gallon/min pump performance

-TERMS-
Payment in full via wire transfer prior to removal.

Price quoted in United States Dollars.

This is a temporary description subject to change and amplification.

Sale is subject to terms and conditions of FRANKE Sales Contract.

APPROXIMATE WEIGHT 37050#