DECKEL MAHO – DMG-DMC64V

DECKEL MAHO – DMG-DMC64V

DMG-DMC64V

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2002 DECKEL MAHO DMC64V linear drive Vertical Machining Center:
Made in Geretsried, Germany

See a VIDEO of the table, laser and probe at:

HEIDENHAIN iTNC530 Control with Ethernet & Electronic Handwheel

-HIGHLIGHTS-
Linear drive (no ballscrew) in the X-Axis with rapid traverse of 2,755 ipm

30 position pick-up tool changer which can be loaded during machining time

Tool changer is located behind working area to protect from emulsion &dirt

Direct measuring system (Heidenhain glass scales) for maximum accuracy

15″ TFT flat screen on HEIDENHAIN iTNC530 Control

Build date…………………………………………….. 12/2002
First installed new…………………………………….. 08/2003
Only 14,171 Program run hours over the total life of the machine
Only 13,907 spindle run time hours over the total life of the machine

-WORKING RANGE-
X axis………………………………………….. 25.2″ (640 mm)
Y axis………………………………………….. 23.6″ (600 mm)
Z axis………………………………………….. 19.7″ (500 mm)

-FEED-
Feed force X/Y/Z……………………………………….. 7,000 N
Feed rate……………………….. 0.04-1,575 ipm (1-40,000 mm/min)
Rapid traverse X/Y,Z……. 2,755 ipm (70 m/min) No ballscrew in X-Axis
Rapid traverse Y-Axis……………………….. 1,575 ipm (40 m/min)
Rapid traverse Z-Axis……………………….. 1,575 ipm (40 m/min)
Ball screw diameter/pitch (Y/Z)………………. 1.57/0.6″ (40/15 mm)

-ACCELERATION-
X-axis………………………………………………… 5 m/s-2
Y-axis………………………………………………… 4 m/s-2
Z-axis………………………………………………… 5 m/s-2

-POSITIONING ACCURACY (ADMISSIBLE VALUE ACCORDING TO VDI/DGQ 3441)
P: Y,Z-axis (direct measuring system) acc. VDI/DGQ 3441 0.0004″ (0.010 mm)
P: X-axis (direct measuring system) acc. VDI/DGQ 3441 0.0003″ (0.008 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z PATH MEASURING SYSTEM (RESOLUTION)-
Direct……………………………………………….. 0.001 mm

-MAIN SPINDLE-
Speed range……………………………………….. 1-12,000 rpm
Drive power 40% DC/continous duty………….. 25.5/17.4 hp (19/13 kW)
Torque 40% DC/continous duty……………. 73/51.1 ft/lbs (100/70 Nm)
Tool mounting DIN 69 871-A……………………………….. CAT 40
Tool clamping force…………………………………….. 8,000 N
Tool releasing force…………………………………… 13,000 N
Acceleration 0-12,000 rpm……………………………. 2.3 seconds
Deceleration 12,000 rpm-0……………………………. 1.4 seconds

-PICK-UP TOOL MAGAZINE/CHANGER-
Number of tools…………………………………………….. 30
Maximum tool diameter……………………………… 3.9″ (100 mm)
Maximum tool diameter, vacant adjacent places………… 5.5″ (140 mm)
Maximum tool length………………………………. 11.8″ (300 mm)
Maximum tool weight……………………………… 15.4 lbs (7 kg)
Maximum loading weight of tool magazine……………. 198 lbs (90 kg)
Chip to chip time………………………… Approximately 7 seconds

-TABLE DESIGN-
Clamping area with T-slots DIN 650-14.. 33.5″ x 23.6″ (850 mm x 600 mm)
Loading height (upper edge of table)……………….. 33.5″ (850 mm)
Maximum work load capacity…………………….. 1,320 lbs (600 kg)

-NC ROTARY-TILT TABLE-
C-Axis rotation range…………………………. 360 x 0.001 degree
C-Axis rotary speed……………………………………… 35 rpm
A-Axis swivel range…………………….. Plus or minus 135 degrees
A-Axis swivel speed……………………………………… 35 rpm
Distance between trunnion flanks………. Approximately 19.5″ (495 mm)
Maximum part swing between trunnion flanks.. Approximately 19″ (483 mm)
Maximum weight on trunnion table…….. Approximately 265 lbs (120 kg)
Table is equipped with a EROWA Quick Chuck for fast pallet change outs

-CHIP CONVEYOR WITH PAPER BAND FILTER AND THROUGH THE SPINDLE COOLANT-
Capacity 158 gallons (600 liter) INTERLIT SPB 3/600 ND German made unit
Ejection height of the chip conveyor……………… 49.2″ (1,250 mm)
Pump capacity external tool cooling 10.6 gallon/min (40 l/min)29PSI(2 bar)
Pump capacity spray gun.. 13.2 gallon/min (50 l/min) 30.5 PSI (2.1 bar)
Pump capacity for flushing of bed/magazine door 23.7gal/min(90l/min)1.9bar
Pump capacity for coolant thru the spindle 580PSI(40 bar)8gal/min(30l/min)

-EQUIPPED WITH-
HEIDENHAIN iTNC530 CNC Control with 15″ TFT flat screen monitor

Heidenhain converter and Siemens drives

Linear drive in X axis, ballscrews in Y & Z axes

Spray gun

Multi input transformer

Chiller for direct drive NC Rotary Tilt Table

Fully enclosed work cabin

RENISHAW OMP40-2 Infrared Parts Measuring Probe

RENISHAW Laser tool breakage monitoring with tool length/diametermeasuring

TORIT Oil & Emulsion mist collector

Specifications are subject to verfication by buyer.

Price quoted is in United States Dollars.
APPROXIMATE WEIGHT 17637#

Email Dealer

Category:

Additional information

Make

Size

Year

Condition

Model

yfranke

0 out of 5
No Reviews Yet

Franke CNC, LLC.

N112 W16298 Mequon Rd., Germantown, WI, US
Phone:

Read More

Auction Alert

Stay up to date with the latest metal cutting and fabricating auctions in Canada.

Thank you for subscribing to Clue Auctions